Icing Inhibitors
Fuel system icing inhibitor is an additive to aviation fuels that prevents the formation of ice in fuel lines. Jet fuel can contain a small amount of dissolved water that does not appear in droplet form. As an aircraft gains altitude, the temperature drops and Jet fuel’s capacity to hold water is diminished. Dissolved water can separate out and could become a serious problem if it freezes in fuel lines or filters, blocking the flow of fuel and shutting down an engine.
We offer icing inhibitors that prevent icing formation in fuel lines.

RON/ MON boosters
Octane measures the fuel’s ability to resist knock which is caused by self-ignition of the fuel. Our wide range of RON/MON boosters improve the fuel’s resistance to self-ignition.
We offer RON/MON boosters to improve the octane number of gasoline (components).

PPD
Our pour point depressants prevent and inhibit paraffin wax solidification and deposition in crude and fuel oils to enable the fuel to flow at lower temperatures.

Odor Reduction
Odor Reduction chemicals will make objectionable odor to acceptable in order to reduce complaints.

Corrosion Inhibitors
The corrosion inhibitor forms a protective layer, which prevents corrosive substances in the fuel from coming in contact with metal and repels water. Corrosion inhibitors decrease the corrosion rate of metals and alloys.

Metal deactivators
Metal deactivators increase your fuels stability against oxidation due to presence of copper, vanadium and iron in product.

Mercaptane Scavengers
Due to volatility of mercaptans, they tend to evolve into vapour spaces, where their offensive odours create problems in and around storage areas and throughout pipelines and shipping systems used for transportation causing metal corrosion.
Our Mercaptane Scavengers remove mercaptans from all oil streams.

Lubricity
Diesel fuel must meet minimum lubricity requirements to protect components such as fuel injector pumps and fuel injectors against premature wear. Producing Ultra Low Sulphur Diesel fuels refiners increase the severity of hydro treating to cut sulphur content, most of the natural lubricity is removed. Lubricity improvers are able to restore the lubricity to the required performance level, by creating a fine layer over a metal surface, so that direct metal-to-metal contact is avoided. Cargo Treatment Services lubricity improvers perform even in the coldest climates and are “A” certified for use with the new ULSD fuels.

H2S
Hydrogen sulfide (H2S) scavengers are widely used in hydrocarbon and chemical processing facilities. These specialized chemicals react selectively with and remove H2S to help meet product and process specifications.
Our sulfide scavengers are specifically designed to treat both crude oil and refined products, to be a cost-effective solution for a broad range of operating conditions and product compositions.

Dyes
We offer green and red dyes that can be used to identify and trace products.